Product Center
Product Center
OLExS series continuous liposome extrusion equipment mainly solves the problems of large particles and poor stability of liposomes, nanoparticles and other materials, and can effectively control the size and distribution of sample particles. OLExS continuous liposome extruder has the characteristics of good effect, high efficiency, convenient use and small footprint, providing a good operating experience for liposome research and development and production in universities and enterprises.
| Model | OLExS-L | OLExS-Pi | OLExS-Pd |
| Maximum Pressure[MPa] | 10 | 10 | 10 |
| FinalProduct Size[nm] | 50~1000 | 50~1000 | 50~1000 |
| Batch Sample Volume | 15~2000mL | 50~3000mL | 3L~500L |
| Maximum Product Concentration[mg/mL] | 200 | 200 | 200 |
| Operating Temperature Range[℃] | 5~80 | 5~80 | 5~80 |
| Material | SS316L | SS316L | SS316L |
| Power Source | Piston Pump | Piston Pump | Piston Pump/Diaphragm Pump |
| Extruder Diameter[mm] | 47 | 90/142 | 142/293 |
| Number of Extruder Unit | 2 | 2 | ≥2 |
| Maximum Flow Rate | 200mL/min | 600mL/min | 600-1000L/H |
| Flow Rate Continuously Adiustable | √ | √ | √ |
| High and Low Voltage Protection | √ | √ | √ |
| Flow Setting Error | ≤±1% | ≤±1% | ≤±1% |
| Flow Repeatability Error% | ≤1% | ≤1% | ≤1% |
| Pressure Pulsation[MPa] | ≤0.2 | ≤0.2 | ≤0.2 |
| Pressure Accuracy[MPa] | ≤0.1 | ≤0.1 | ≤0.1 |
PRINCIPLE
The principle of liposome extrusion is that the liposome vesicles are squeezed through a certain extrusion power source, so that they can pass through the PC filter membrane under certain pressure conditions.This pressure, as the shear force in the process of liposome vesicles crossing the membrane, can achieve the effect of particle size control.Its morphology, size, and distribution can be greatly improved.
TECHNICALCHARACTERISTICS
AITESEN continuous liposome extrusion equipment mainly solves the problems of large size and poor stability of materials such as liposome and nanoparticles, and can effectively control the size and distribution of sample particles, OLExS continuous liposome extruder has the characteristics of good effect, high efficiency, convenient use and small footprint, which provides a good operation experience for the develop.ment and production of liposome in universities and enterprises.
Copy product links
Long by picture save/share
Leave your contact information and professionals will serve you
Official Account
Company Address: A-123, No. 188, Suhong East Road, Suzhou Industrial Park
Telephone: 181-1848-1917 400 hotline: 400-101-3307
Copyright © 2023 All Rights Reserved Suzhou Aitesen Pharmaceutical Equipment Co., Ltd. All rights reserved
Address: A-123, No. 188, Suhong East Road, Suzhou Industrial Park Tel: 181-1848-1917 Service: 400-101-3307
SuICP No. 17043289-1 Su Public Security Network No. 32059002004014
Official Account
WeChat
中文
English
